TM6
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators TM6
  •  
  • Design data:
  • - design pressure 6 barg.
  • - design temperature 300°C.
  • - test pressure 10 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 97/23/CE Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type TM6
Nominal
bore
Fabrication length Max. OD Add. length Z
for additional
Springrate Friction
force
DN
(mm)
flange
(mm)
weldend
(mm)
flange
(mm)
weldend
(mm)
-25 / +25 mm
(mm)
lateral
(N/mm)
angular
(N/mm)

(N/bar)
80 570 550 255 205 150 14 3 3
100 605 585 305 255 150 29 7 5
125 615 595 355 280 150 65 13 7
150 680 660 380 330 150 109 22 8
200 715 700 480 405 150 321 63 25
250 740 725 560 480 200 343 120 46
300 775 775 660 560 240 243 122 76
350 595 760 685 635 240 171 86 119
400 595 785 785 710 240 248 124 187
450 635 810 840 785 240 513 257 225
500 635 840 940 840 240 690 346 325
600 635 865 1065 965 240 1155 579 529
700 685 915 1195 1065 265 1472 899 746
750 710 915 1270 1195 290 1499 1096 821
800 760 990 1320 1170 330 1394 1320 867
900 810 990 1475 1270 365 1602 1856 1160

  • Hibro Compensatoren bv
  • All rights reserved