HIBRO Compensatoren Barneveld

		TM3,5

Stainless steel compensators TM3,5
Design data:
- design pressure 3,5 barg.
- design temperature 300°C.
- test pressure 5,25 barg.
- cycle life 1000 cycles.
- own frequency > 60 Hz.
- basic lateral movement -25 / +25 mm
Other characteristics:
- material membrane EN 1.4541.
- material weldends EN 1.0305.
- material flanges EN 1.0460
- material inner sleeve EN 1.4541.
- flange drilling PN10 DIN 2632
- for other dimensions, movements, pressures and temperatures or materials and
- certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.

**Design parameters and dimensions Stainless steel compensators type TM3,5**
Nominal bore	Fabrication length		Max. OD		Add. length Z for additional	Springrate		Friction force
DN (mm)	flange (mm)	weldend (mm)	flange (mm)	weldend (mm)	-25 / +25 mm (mm)	lateral (N/mm)	angular (N/mm)	(N/bar)
350	610	735	660	635	240	90	45	96
400	610	735	735	685	240	131	66	148
450	660	760	785	760	255	203	115	175
500	660	810	840	815	255	273	155	212
600	660	810	990	940	255	459	260	368
700	685	810	1115	1040	270	638	404	564
750	710	840	1195	1190	290	675	494	621
800	760	890	1245	1145	330	751	711	652
900	810	990	1400	1245	360	854	962	894