TM10
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators TM10
  •  
  • Design data:
  • - design pressure 10 barg.
  • - design temperature 300°C.
  • - test pressure 16 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 97/23/CE Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type TM10
Nominal
bore
Fabrication length Max. OD Add. length Z
for additional
Springrate Friction
force
DN
(mm)
flange
(mm)
weldend
(mm)
flange
(mm)
weldend
(mm)
-25 / +25 mm
(mm)
lateral
(N/mm)
angular
(N/mm)

(N/bar)
80 570 550 280 230 150 14 3 3
100 605 585 305 255 150 29 7 5
125 615 595 355 285 150 65 13 7
150 680 660 380 330 150 109 22 16
200 715 700 480 405 200 181 63 38
250 740 725 585 480 215 297 120 55
300 775 755 660 560 240 337 169 94
350 660 810 760 660 240 240 120 133
400 660 810 840 710 240 348 175 202
450 685 840 915 785 240 728 365 249
500 685 890 990 865 240 975 489 350
600 710 890 1170 940 240 1628 815 540
700 760 915 1295 1040 265 2068 1263 767
750 785 965 1370 1115 290 2103 1538 847
800 865 1015 1420 1170 330 1954 1850 869
900 890 1190 1575 1295 365 2241 2597 1186

  • Hibro Compensatoren bv
  • All rights reserved