TM25
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators TM25
  •  
  • Design data:
  • - design pressure 25 barg.
  • - design temperature 300°C.
  • - test pressure 37,5 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN25 DIN 2634
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type TM25
Nominal
bore 		Fabrication length Max. OD Add. length Z
for additional 		Springrate Friction
force
DN
(mm) 		flange
(mm) 		weldend
(mm) 		flange
(mm) 		weldend
(mm) 		-25 / +25 mm
(mm) 		lateral
(N/mm) 		angular
(N/mm)
(N/bar)
80 570 550 330 255 150 24 5 6
100 615 595 405 305 150 49 10 11
125 655 635 430 330 150 95 19 18
150 680 660 480 380 175 116 31 24
200 820 800 635 455 215 215 87 41
250 920 900 685 535 240 320 161 65
300 735 1065 710 610 290 458 335 136
350 710 940 840 685 265 486 297 195
400 710 940 915 735 265 702 429 249
450 710 940 990 810 265 973 595 352
500 735 965 1190 890 265 1307 798 464
600 760 1040 1270 1015 290 1827 1336 709
700 865 1170 1420 1170 365 2029 2350 921
750 940 1270 1400 1220 415 1912 2863 966
800 940 1320 1575 1295 415 2301 3446 1214

  • Hibro Compensatoren bv
  • All rights reserved