HIBRO Compensatoren Barneveld

		HS3,5

Stainless steel compensators HS3,5
Design data:
- design pressure 3,5 barg.
- design temperature 300°C.
- test pressure 5,25 barg.
- cycle life 1000 cycles.
- own frequency > 60 Hz.
Other characteristics:
- material membrane EN 1.4541.
- material weldends EN 1.0305.
- material flanges EN 1.0460
- material inner sleeve EN 1.4541.
- flange drilling PN10 DIN 2632
- for other dimensions, movements, pressures and temperatures or materials and
- certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.

**Design parameters and dimensions Stainless steel compensators type HS3,5**
Nominal bore	Fabrication length		Max. OD		Movement	Springrate	Friction moment
DN (mm)	flange (mm)	weldend (mm)	flange (mm)	weldend (mm)	angular (°)	angular (Nm/°)	angular (Nm/bar)
350	380	610	610	585	-8 / +8	45	15
400	380	610	685	635	-8 / +8	66	19
450	405	635	710	685	-8 / +8	115	29
500	405	635	785	735	-7 / +7	155	35
600	430	760	890	840	-7 / +7	260	66
700	430	760	1015	965	-5,5 / +5,5	404	99
750	455	760	1090	1015	-5 / +5	494	113
800	455	760	1170	1065	-4,5 / +4,5	711	141
900	480	785	1270	1170	-4 / +4	962	213