TM16
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators TM16
  •  
  • Design data:
  • - design pressure 16 barg.
  • - design temperature 300°C.
  • - test pressure 25 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN16 DIN 2633
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type TM16
Nominal
bore 		Fabrication length Max. OD Add. length Z
for additional 		Springrate Friction
force
DN
(mm) 		flange
(mm) 		weldend
(mm) 		flange
(mm) 		weldend
(mm) 		-25 / +25 mm
(mm) 		lateral
(N/mm) 		angular
(N/mm)
(N/bar)
80 570 550 330 230 150 14 3 3
100 605 585 380 280 150 29 7 9
125 615 595 430 330 150 65 13 13
150 680 660 480 355 200 58 22 20
200 715 700 560 430 215 157 63 38
250 770 750 685 510 240 238 120 77
300 940 915 710 558 240 422 212 92
350 785 965 785 660 305 222 179 133
400 785 1015 865 710 305 321 260 197
450 785 1015 965 785 305 472 382 287
500 785 1040 1040 840 305 631 511 349
600 810 1040 1195 965 305 1049 848 540
700 840 1065 1345 1090 305 1619 1310 780
750 890 1120 1145 1165 325 1735 1593 941
800 890 1170 1525 1245 330 2022 1915 1154
900 940 1245 1675 1370 365 2315 2682 1368

  • Hibro Compensatoren bv
  • All rights reserved