HS6
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators HS6
  •  
  • Design data:
  • - design pressure 6 barg.
  • - design temperature 300°C.
  • - test pressure 10 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type HS6
Nominal
bore 		Fabrication length Max. OD Movement
 Springrate Friction
moment
DN
(mm) 		flange
(mm) 		weldend
(mm) 		flange
(mm) 		weldend
(mm) 		angular
(°) 		angular
(Nm/°) 		angular
(Nm/bar)
80 380 360 205 205 -10 / +10 3 1
100 400 380 230 230 -10 / +10 7 2
125 405 385 255 255 -10 / +10 13 3
150 470 450 280 280 -10 / +10 22 4
200 500 480 355 355 -10 / +10 63 7
250 525 510 405 405 -8 / +8 120 12
300 535 515 480 480 -8 / +8 122 17
350 380 585 610 585 -8 / +8 86 18
400 380 610 685 635 -8 / +8 124 30
450 405 660 710 685 -8 / +8 257 44
500 430 685 785 735 -7 / +7 346 53
600 454 760 915 865 -6 / +6 579 83
700 455 785 1040 990 -5,5 / +5,5 899 144
750 480 810 1115 1065 -5 / +5 1096 164
800 510 840 1195 1115 -4,5 / +4,5 1320 191
900 535 685 1320 1245 -4 / +4 1856 267

  • Hibro Compensatoren bv
  • All rights reserved