HS10
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators HS10
  •  
  • Design data:
  • - design pressure 10 barg.
  • - design temperature 300°C.
  • - test pressure 16 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type HS10
Nominal
bore 		Fabrication length Max. OD Movement
 Springrate Friction
moment
DN
(mm) 		flange
(mm) 		weldend
(mm) 		flange
(mm) 		weldend
(mm) 		angular
(°) 		angular
(Nm/°) 		angular
(Nm/bar)
80 380 360 205 205 -10 / +10 3 1
100 400 380 255 230 -10 / +10 7 2
125 405 385 280 255 -10 / +10 13 3
150 470 450 330 280 -10 / +10 22 4
200 500 480 380 355 -8 / +8 63 7
250 525 510 455 405 -7 / +7 120 12
300 535 515 535 480 -8 / +8 169 17
350 405 660 660 585 -8 / +8 120 24
400 430 710 735 635 -8 / +8 175 34
450 430 735 810 710 -8 / +8 365 49
500 455 785 890 760 -7 / +7 489 71
600 480 785 1040 890 -6 / +6 815 108
700 535 660 1170 1015 -5,5 / +5,5 1263 166
750 560 680 1245 1090 -5 / +5 1538 189
800 610 735 1295 1145 -4 / +4 1850 242
900 1015 785 1445 1295 -4 / +4 2597 339

  • Hibro Compensatoren bv
  • All rights reserved