HD6
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators HD6
  •  
  • Design data:
  • - design pressure 6 barg.
  • - design temperature 300°C.
  • - test pressure 10 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 97/23/CE Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type HD6
Nominal
bore
Fabrication length Max. OD Add. length Z
for additional
Springrate Friction
force
DN
(mm)
flange
(mm)
weldend
(mm)
flange
(mm)
weldend
(mm)
-25 / +25 mm
(mm)
lateral
(N/mm)
angular
(N/mm)

(N/bar)
80 570 550 205 205 150 14 3 12
100 605 585 230 230 150 29 7 19
125 615 595 255 255 150 65 13 32
150 680 660 280 280 150 109 22 44
200 715 700 355 355 150 321 63 89
250 740 725 405 405 200 343 120 118
300 775 755 480 480 240 243 122 142
350 610 840 610 585 240 171 86 147
400 610 865 685 635 240 248 124 251
450 635 915 710 685 240 513 257 361
500 660 915 785 735 240 690 346 439
600 685 965 915 865 240 1155 579 689
700 711 1015 1040 990 265 1472 899 1080
750 760 1090 1115 1065 290 1499 1096 1126
800 810 1170 1195 1115 330 1394 1320 1205
900 890 1015 1320 1245 365 1602 1856 1462

  • Hibro Compensatoren bv
  • All rights reserved