HD10
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators HD10
  •  
  • Design data:
  • - design pressure 10 barg.
  • - design temperature 300°C.
  • - test pressure 16 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type HD10
Nominal
bore 		Fabrication length Max. OD Add. length Z
for additional 		Springrate Friction
force
DN
(mm) 		flange
(mm) 		weldend
(mm) 		flange
(mm) 		weldend
(mm) 		-25 / +25 mm
(mm) 		lateral
(N/mm) 		angular
(N/mm)
(N/bar)
80 570 550 205 205 150 14 3 12
100 605 585 255 230 150 29 7 19
125 615 595 280 255 150 65 13 32
150 680 660 330 280 150 109 22 44
200 715 700 380 355 200 181 63 67
250 740 725 455 405 215 297 120 110
300 775 755 535 480 240 337 169 143
350 635 915 660 585 240 240 120 197
400 660 965 735 635 240 348 175 283
450 685 965 810 710 240 728 365 403
500 685 1015 890 760 240 975 489 588
600 710 1040 1040 890 240 1628 815 894
700 710 915 1170 1015 265 2068 1263 1250
750 785 965 1245 1090 290 2103 1538 1302
800 840 1040 1295 1145 330 1954 1850 1465
900 1370 1145 1445 1295 365 2241 2597 1856

  • Hibro Compensatoren bv
  • All rights reserved