HD3,5
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators HD3,5
  •  
  • Design data:
  • - design pressure 3,5 barg.
  • - design temperature 300°C.
  • - test pressure 5,25 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 97/23/CE Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type HD3,5
Nominal
bore
Fabrication length Max. OD Add. length Z
for additional
Springrate Friction
force
DN
(mm)
flange
(mm)
weldend
(mm)
flange
(mm)
weldend
(mm)
-25 / +25 mm
(mm)
lateral
(N/mm)
angular
(N/mm)

(N/bar)
350 610 840 610 585 240 90 45 122
400 610 865 685 635 240 131 66 156
450 660 890 710 685 255 203 115 226
500 660 890 785 735 255 273 155 275
600 685 965 890 840 255 459 260 515
700 710 1015 1015 965 270 638 404 732
750 735 1015 1090 1015 290 675 494 777
800 760 1065 1170 1065 330 751 711 853
900 785 1065 1270 1170 360 854 962 1184

  • Hibro Compensatoren bv
  • All rights reserved