GS25
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators GS25
  •  
  • Design data:
  • - design pressure 25 barg.
  • - design temperature 300°C.
  • - test pressure 32,5 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN25 DIN 2634
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 97/23/CE Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type GS25
Nominal
bore
Fabrication length Max. OD Movement
Springrate Friction
moment
DN
(mm)
flange
(mm)
weldend
(mm)
flange
(mm)
weldend
(mm)
angular
(°)
angular
(Nm/°)
angular
(Nm/bar)
80 380 360 215 205 -10 / +10 5 1
100 400 380 255 230 -10 / +10 10 2
125 445 425 280 255 -10 / +10 19 3
150 470 450 315 305 -9 / +9 31 4
200 585 585 380 380 -7 / +7 87 8
250 660 660 455 455 -6 / +6 161 16
300 635 535 545 545 -5 / +5 335 25
350 950 810 660 635 -7 / +7 297 39
400 1015 865 785 760 -6,5 / +6,5 429 54
450 850 685 865 810 -6 / +6 595 81
500 890 710 940 890 -5,5 / +5,5 798 104
600 1065 890 1065 990 -5 / +5 1336 163
700 1280 1090 1270 1145 -4 / +4 2350 266
750 1395 1195 1345 1220 -3,5 / +3,5 2863 328
800 1525 1320 1445 1295 -3,5 / +3,5 3445 400

  • Hibro Compensatoren bv
  • All rights reserved