GS40
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators GS40
  •  
  • Design data:
  • - design pressure 40 barg.
  • - design temperature 300°C.
  • - test pressure 60 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN40 DIN 2635
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type GS40
Nominal
bore 		Fabrication length Max. OD Movement
 Springrate Friction
moment
DN
(mm) 		flange
(mm) 		weldend
(mm) 		flange
(mm) 		weldend
(mm) 		angular
(°) 		angular
(Nm/°) 		angular
(Nm/bar)
80 455 430 240 240 -4 / +4 12 1
100 480 455 280 280 -3,5 / +3,5 27 2
125 510 480 340 340 -3,5 / +3,5 48 3
150 535 510 405 405 -3 / +3 80 5
200 635 610 510 510 -3 / +3 181 10
250 685 660 595 595 -2,5 / +2,5 339 19
300 685 660 695 695 -2,5 / +2,5 688 31
350 785 685 735 735 -2,5 / +2,5 705 43
400 965 840 810 810 -2,5 / +2,5 1031 66
450 1065 940 940 940 -2,5 / +2,5 1066 90
500 1115 965 1015 1015 -2,5 / +2,5 1436 127
600 1320 1115 1195 1195 -2,5 / +2,5 2415 203

  • Hibro Compensatoren bv
  • All rights reserved