GS16
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators GS16
  •  
  • Design data:
  • - design pressure 16 barg.
  • - design temperature 300°C.
  • - test pressure 25 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN16 DIN 2633
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 97/23/CE Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type GS16
Nominal
bore
Fabrication length Max. OD Movement
Springrate Friction
moment
DN
(mm)
flange
(mm)
weldend
(mm)
flange
(mm)
weldend
(mm)
angular
(°)
angular
(Nm/°)
angular
(Nm/bar)
80 380 360 215 190 -10 / +10 3 1
100 400 380 255 215 -10 / +10 7 2
125 405 385 280 240 -10 / +10 13 3
150 470 450 315 290 -8 / +8 22 4
200 500 480 380 370 -7 / +7 63 7
250 525 510 445 445 -6 / +6 120 12
300 685 660 535 535 -8 / +8 212 22
350 480 785 660 610 -8 / +8 179 30
400 510 810 735 685 -8 / +8 260 46
450 560 840 810 760 -8 / +8 383 64
500 620 865 890 840 -7 / +7 511 83
600 1085 915 1040 990 -6 / +6 848 133
700 1115 840 1295 1090 -5,5 / +5,5 1310 211
750 1145 940 1320 1190 -5 / +5 1593 253
800 1245 1040 1395 1244 -4,5 / +4,5 1915 314
900 1270 1065 1550 1346 -4 / +4 2682 429

  • Hibro Compensatoren bv
  • All rights reserved