GS10
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators GS10
  •  
  • Design data:
  • - design pressure 10 barg.
  • - design temperature 300°C.
  • - test pressure 16 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type GS10
Nominal
bore 		Fabrication length Max. OD Movement
 Springrate Friction
moment
DN
(mm) 		flange
(mm) 		weldend
(mm) 		flange
(mm) 		weldend
(mm) 		angular
(°) 		angular
(Nm/°) 		angular
(Nm/bar)
80 380 360 215 190 -10 / +10 3 1
100 400 380 255 215 -10 / +10 7 2
125 405 385 280 240 -10 / +10 13 3
150 470 450 315 290 -10 / +10 22 4
200 500 480 380 365 -8 / +8 63 7
250 525 510 445 445 -7 / +7 120 12
300 535 515 530 530 -8 / +8 169 17
350 405 660 660 610 -8 / +8 120 24
400 430 710 735 685 -8 / +8 175 34
450 430 735 810 760 -8 / +8 365 49
500 480 785 875 840 -7 / +7 489 71
600 560 785 1040 990 -6 / +6 815 108
700 805 660 1170 1090 -5,5 / +5,5 1263 166
750 840 685 1245 1195 -5 / +5 1538 189
800 900 735 1295 1220 -4,5 / +4,5 1850 242
900 1015 785 1445 1345 -4 / +4 2597 339

  • Hibro Compensatoren bv
  • All rights reserved