TD6
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators TD6
  •  
  • Design data:
  • - design pressure 6 barg.
  • - design temperature 300°C.
  • - test pressure 10 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 97/23/CE Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type TD6
Nominal
bore
Fabrication length Max. OD Add. length Z
for additional
Springrate Friction
force
DN
(mm)
flange
(mm)
weldend
(mm)
flange
(mm)
weldend
(mm)
-25 / +25 mm
(mm)
lateral
(N/mm)
angular
(N/mm)

(N/bar)
80 570 550 255 205 150 14 3 3
100 605 585 305 255 150 29 7 5
125 615 595 355 280 150 65 13 7
150 680 660 380 330 150 109 22 16
200 715 700 485 405 150 321 63 38
250 740 725 560 480 200 343 120 55
300 775 755 660 560 240 243 122 93
350 610 785 710 660 240 171 86 143
400 610 810 790 710 240 248 124 217
450 635 840 865 785 240 513 257 267
500 635 865 965 865 240 690 346 376
600 660 890 1115 940 240 1155 579 579
700 710 940 1220 1065 265 1472 899 819
750 735 990 1320 1145 290 1499 1096 1011
800 785 1040 1370 1195 330 1394 1320 1071
900 840 1145 1549 1320 365 1602 1856 1342

  • Hibro Compensatoren bv
  • All rights reserved