TD3,5
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators TD3,5
  •  
  • Design data:
  • - design pressure 3,5 barg.
  • - design temperature 300°C.
  • - test pressure 5,25 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN10 DIN 2632
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type TD3,5
Nominal
bore 		Fabrication length Max. OD Add. length Z
for additional 		Springrate Friction
force
DN
(mm) 		flange
(mm) 		weldend
(mm) 		flange
(mm) 		weldend
(mm) 		-25 / +25 mm
(mm) 		lateral
(N/mm) 		angular
(N/mm)
(N/bar)
350 610 760 635 635 240 90 45 96
400 610 760 735 685 240 131 66 148
450 665 840 785 760 255 203 115 214
500 660 840 865 840 255 273 155 262
600 685 865 1015 940 255 459 260 422
700 710 890 1145 1065 270 638 404 631
750 735 915 1220 1115 290 675 494 695
800 760 965 1320 1170 330 751 711 860
900 785 990 1430 1245 360 854 962 1049

  • Hibro Compensatoren bv
  • All rights reserved