TD16
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators TD16
  •  
  • Design data:
  • - design pressure 16 barg.
  • - design temperature 300°C.
  • - test pressure 25 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN16 DIN 2633
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 2014/68/EU Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type TD16
Nominal
bore 		Fabrication length Max. OD Add. length Z
for additional 		Springrate Friction
force
DN
(mm) 		flange
(mm) 		weldend
(mm) 		flange
(mm) 		weldend
(mm) 		-25 / +25 mm
(mm) 		lateral
(N/mm) 		angular
(N/mm)
(N/bar)
80 570 550 330 230 150 14 3 6
100 605 585 380 280 150 29 7 11
125 615 595 430 330 150 65 13 19
150 680 660 480 355 205 58 22 24
200 715 700 560 430 215 157 63 46
250 770 750 685 510 240 238 120 77
300 940 915 710 858 240 422 212 141
350 810 1015 845 685 305 222 179 170
400 810 1040 940 735 305 321 260 247
450 810 1090 1015 835 305 472 382 355
500 810 1145 1120 910 305 631 511 484
600 810 1145 1295 1040 305 1049 848 736
700 1420 1145 1475 1195 305 1619 1310 624
750 1420 1270 1320 1320 325 1735 1593 789
800 1525 1320 1370 1370 330 2022 1915 831
900 1625 1420 1525 1525 365 2315 2682 1098

  • Hibro Compensatoren bv
  • All rights reserved