HD25
  • nederlands
  • Deutsch
  • contact
  • home
 

  • Stainless steel compensators HD25
  •  
  • Design data:
  • - design pressure 25 barg.
  • - design temperature 300°C.
  • - test pressure 37,5 barg.
  • - cycle life 1000 cycles.
  • - own frequency > 60 Hz.
  • - basic lateral movement -25 / +25 mm
  •  
  • Other characteristics:
  • - material membrane EN 1.4541.
  • - material weldends EN 1.0305.
  • - material flanges EN 1.0460
  • - material inner sleeve EN 1.4541.
  • - flange drilling PN25 DIN 2634
  • - for other dimensions, movements, pressures and temperatures or materials and
  • - certification, e.g. CE-PED 97/23/CE Cat. III, please contact Hibro Compensatoren.
 
Design parameters and dimensions Stainless steel compensators type HD25
Nominal
bore
Fabrication length Max. OD Add. length Z
for additional
Springrate Friction
force
DN
(mm)
flange
(mm)
weldend
(mm)
flange
(mm)
weldend
(mm)
-25 / +25 mm
(mm)
lateral
(N/mm)
angular
(N/mm)

(N/bar)
80 570 550 205 205 150 24 5 12
100 615 695 255 230 150 49 10 19
125 655 635 280 255 150 95 19 32
150 680 660 330 330 175 116 31 46
200 820 800 405 405 215 215 87 74
250 920 900 480 480 240 320 161 128
300 735 1065 635 585 290 458 335 169
350 735 1090 735 660 265 486 297 293
400 760 1145 810 710 265 702 429 402
450 760 890 890 810 265 973 595 607
500 760 890 965 1170 265 1307 798 782
600 760 1040 1145 1065 290 1827 1336 1119
700 865 1220 1320 1245 365 2029 2350 1456
750 940 1295 1370 1295 415 1912 2863 1581
800 945 1320 1445 1370 415 2301 3446 1924

  • Hibro Compensatoren bv
  • All rights reserved